Rückmeldungen Beta 1.9.259 (RC2)

LutzB · Beitrag von **LutzB** » Do Mär 24, 2022 12:35 pm

Die Ankündigung mit den Anpassungen findet ihr dort: https://www.openwb.de/forum/viewtopic.php?f=3&t=5068

SIDE22 · Beitrag von **SIDE22** » Do Mär 24, 2022 9:26 pm

Hausverbrauch wird nicht angezeigt steht alles auf 0
EVU zähler mpm3pm
Beta: 1.9.259

hier einmal Debug log mode 2

2022-03-24 22:24:00: PID: 8973: **** Regulation loop start **** (LV1) at 70 main /var/www/html/openWB/regel.sh
2022-03-24 22:24:00: PID: 7795: **** FATAL ********************************* (LV0) at 61 cleanup /var/www/html/openWB/regel.sh
2022-03-24 22:24:00: PID: 7795: **** FATAL Regulation loop needs 9 seconds (LV0) at 60 cleanup /var/www/html/openWB/regel.sh
2022-03-24 22:24:00: PID: 7795: **** FATAL ********************************* (LV0) at 59 cleanup /var/www/html/openWB/regel.sh
  RequestsDependencyWarning)
/usr/lib/python3/dist-packages/requests/__init__.py:91: RequestsDependencyWarning: urllib3 (1.26.9) or chardet (3.0.4) doesn't match a supported version!
2022-03-24 22:23:58: PID: 7795: Zeit zum abfragen aller Werte 6 Sekunden (LV1) at 176 main /var/www/html/openWB/regel.sh
2022-03-24 22:23:57: PID: 7795: chargestatlp1 0	chargestatlp2 0	chargestatlp3 0 (LV1) at 1302 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: plugstatlp1 0	plugstatlp2 1	plugstatlp3 0 (LV1) at 1301 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: lp1enabled 1	lp2enabled 1	lp3enabled 1 (LV1) at 1300 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: EVU 1:V/2A 2: V/3A 3: V/3A (LV1) at 1299 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: lla3 0	llv3 232.1	llas13 0 llas23  soclp1 0 soclp2 42 (LV1) at 1298 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: lla2 0	llv2 232.4	llas12 0 llas22  sofortll 10 hausverbrauch 0 wattbezug 0 uberschuss 0 (LV1) at 1297 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: lla1 0	llv1 232.3	llas11 0 llas21  mindestuberschuss 700 abschaltuberschuss 400 lademodus 3 (LV1) at 1296 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: pv1watt 0 pv2watt 0 pvwatt 0 ladeleistung 0 llalt 0 nachtladen 0 nachtladen 1 minimalA 6 maximalA 32 (LV1) at 1295 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 7795: ungültiger Wert für wattbezug: 1766.0 (LV0) at 926 loadvars loadvars.sh
2022-03-24 22:23:57: PID: 8148: EVU RET: 0 (LV2) at 26 main modules/bezug_mpm3pm/main.sh
2022-03-24 22:23:57: PID: 16819: legacy run server: Completed running command in 0.75s: ["bezug_mpm3pm.readmpm3pm","/dev/ttyUSB0","5"]
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:57: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x8 0x0 0x0 0x13 0x88 0x2 0x20 0x0 0x5
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x8 0x0 0x0 0x13 0x88 0x2 0x20 0x0 0x5 0x13 0xf0
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:57: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157037.079708, Current Time stamp - 1648157037.091604
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x2c 0x0 0x4 0x31 0x84
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Running transaction 13
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:57: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x8 0x0 0x12 0x7d 0xf7 0x0 0x10 0xdf 0xdd
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x8 0x0 0x12 0x7d 0xf7 0x0 0x10 0xdf 0xdd 0x65 0x68
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:57: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157037.010824, Current Time stamp - 1648157037.022149
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x4 0x0 0x4 0xb1 0x8c
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Running transaction 12
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:57: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:57: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x4 0x0 0x2 0xb1 0xd8
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x4 0x0 0x2 0xb1 0xd8 0x6b 0x8e
2022-03-24 22:23:57: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.959477, Current Time stamp - 1648157036.97141
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x26 0x0 0x2 0x91 0x84
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 11
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x4 0x0 0x1 0x8 0x92
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x4 0x0 0x1 0x8 0x92 0x69 0xe9
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.908074, Current Time stamp - 1648157036.920176
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x18 0x0 0x2 0xf0 0x48
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 10
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x4 0x0 0x0 0xce 0xb8
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x4 0x0 0x0 0xce 0xb8 0xea 0x56
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.857811, Current Time stamp - 1648157036.868998
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x16 0x0 0x2 0x91 0x8b
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 9
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x4 0x0 0x0 0xcd 0xe6
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x4 0x0 0x0 0xcd 0xe6 0x6b 0x5e
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.807624, Current Time stamp - 1648157036.818558
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x14 0x0 0x2 0x30 0x4b
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 8
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x4 0x0 0x0 0x1 0x55
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x4 0x0 0x0 0x1 0x55 0x7f 0xeb
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.761231, Current Time stamp - 1648157036.769519
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x12 0x0 0x2 0xd0 0x4a
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 7
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x4 0x0 0x0 0x1 0x4d
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x4 0x0 0x0 0x1 0x4d 0x7f 0xe1
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.713655, Current Time stamp - 1648157036.722148
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x10 0x0 0x2 0x71 0x8a
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 6
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x4 0x0 0x0 0x1 0x1f
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x4 0x0 0x0 0x1 0x1f 0xfe 0x1c
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.666023, Current Time stamp - 1648157036.674866
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0xe 0x0 0x2 0x11 0x8c
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x8 0x0 0x21 0x23 0x9f 0x0 0x12 0x7d 0xf7
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x8 0x0 0x21 0x23 0x9f 0x0 0x12 0x7d 0xf7 0x53 0xa3
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.600883, Current Time stamp - 1648157036.60933
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x2 0x0 0x4 0x51 0x8d
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 4
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x8 0x0 0x0 0x9 0x11 0x0 0x0 0x1 0x1f
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x8 0x0 0x0 0x9 0x11 0x0 0x0 0x1 0x1f 0x8d 0xff
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.50322, Current Time stamp - 1648157036.511821
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0xc 0x0 0x4 0x30 0x4e
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 3
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x8 0x0 0x0 0x9 0x15 0x0 0x0 0x9 0x11
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x8 0x0 0x0 0x9 0x15 0x0 0x0 0x9 0x11 0xfa 0x3b
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Changing state to IDLE - Last Frame End - 1648157036.448107, Current Time stamp - 1648157036.456752
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0xa 0x0 0x4 0xd0 0x4f
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 2
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Getting transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Adding transaction 5
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Frame advanced, resetting header!!
2022-03-24 22:23:56: PID: 16819: pymodbus.factory: Factory Response[ReadInputRegistersResponse: 4]
2022-03-24 22:23:56: PID: 16819: pymodbus.framer.rtu_framer: Getting Frame - 0x4 0x8 0x0 0x0 0x9 0x15 0x0 0x0 0x9 0x15
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: RECV: 0x5 0x4 0x8 0x0 0x0 0x9 0x15 0x0 0x0 0x9 0x15 0xfb 0xf8
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:56: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: SEND: 0x5 0x4 0x0 0x8 0x0 0x4 0x71 0x8f
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Running transaction 1
2022-03-24 22:23:56: PID: 16819: pymodbus.transaction: Current transaction state - IDLE
2022-03-24 22:23:56: PID: 16819: legacy run server: Received command ["bezug_mpm3pm.readmpm3pm","/dev/ttyUSB0","5"]
2022-03-24 22:23:55: PID: 7795: Calling SoC-Module <modules/soc_kia/main.sh> (LV2) at 22 run_soc_module loadvars.sh
2022-03-24 22:23:53: PID: 7948: RET: 0 (LV2) at 13 main modules/wr2_smamodbus/main.sh
2022-03-24 22:23:53: PID: 16819: legacy run server: Completed running command in 0.06s: ["modules.sma_modbus_tcp.device","192.168.0.212","0","none","none","none","2"]
2022-03-24 22:23:53: PID: 16819: ValueStore: Saving InverterState(currents=[0, 0, 0], power=0, counter=3764592)
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [b'\x009', b'qp']
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [57, 29040]
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Getting transaction 2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Adding transaction 2
2022-03-24 22:23:53: PID: 16819: pymodbus.factory: Factory Response[ReadHoldingRegistersResponse: 3]
2022-03-24 22:23:53: PID: 16819: pymodbus.framer.socket_framer: Processing: 0x0 0x2 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x0 0x39 0x71 0x70
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: RECV: 0x0 0x2 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x0 0x39 0x71 0x70
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: SEND: 0x0 0x2 0x0 0x0 0x0 0x6 0x3 0x3 0x77 0x41 0x0 0x2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Running transaction 2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [b'\x80\x00', b'\x00\x00']
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [32768, 0]
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Getting transaction 1
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Adding transaction 1
2022-03-24 22:23:53: PID: 16819: pymodbus.factory: Factory Response[ReadHoldingRegistersResponse: 3]
2022-03-24 22:23:53: PID: 16819: pymodbus.framer.socket_framer: Processing: 0x0 0x1 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x80 0x0 0x0 0x0
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: RECV: 0x0 0x1 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x80 0x0 0x0 0x0
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: SEND: 0x0 0x1 0x0 0x0 0x0 0x6 0x3 0x3 0x78 0x37 0x0 0x2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Running transaction 1
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Current transaction state - IDLE
2022-03-24 22:23:53: PID: 16819: SMA ModbusTCP: Komponente SMA ModbusTCP Wechselrichter auslesen.
2022-03-24 22:23:53: PID: 16819: legacy run server: Received command ["modules.sma_modbus_tcp.device","192.168.0.212","0","none","none","none","2"]
2022-03-24 22:23:53: PID: 7935: RET: 0 (LV2) at 13 main modules/wr_tripower9000/main.sh
2022-03-24 22:23:53: PID: 16819: legacy run server: Completed running command in 0.07s: ["modules.sma_modbus_tcp.device","192.168.0.211","0","none","none","none","1"]
2022-03-24 22:23:53: PID: 16819: ValueStore: Saving InverterState(currents=[0, 0, 0], power=0, counter=23707905)
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [b'\x01i', b'\xc1\x01']
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [361, 49409]
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Getting transaction 2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Adding transaction 2
2022-03-24 22:23:53: PID: 16819: pymodbus.factory: Factory Response[ReadHoldingRegistersResponse: 3]
2022-03-24 22:23:53: PID: 16819: pymodbus.framer.socket_framer: Processing: 0x0 0x2 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x1 0x69 0xc1 0x1
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: RECV: 0x0 0x2 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x1 0x69 0xc1 0x1
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: SEND: 0x0 0x2 0x0 0x0 0x0 0x6 0x3 0x3 0x77 0x41 0x0 0x2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Running transaction 2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Current transaction state - TRANSACTION_COMPLETE
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [b'\x80\x00', b'\x00\x00']
2022-03-24 22:23:53: PID: 16819: pymodbus.payload: [32768, 0]
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Getting transaction 1
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Adding transaction 1
2022-03-24 22:23:53: PID: 16819: pymodbus.factory: Factory Response[ReadHoldingRegistersResponse: 3]
2022-03-24 22:23:53: PID: 16819: pymodbus.framer.socket_framer: Processing: 0x0 0x1 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x80 0x0 0x0 0x0
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: RECV: 0x0 0x1 0x0 0x0 0x0 0x7 0x3 0x3 0x4 0x80 0x0 0x0 0x0
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Changing transaction state from 'SENDING' to 'WAITING FOR REPLY'
2022-03-24 22:23:53: PID: 16819: pymodbus.client.sync: New Transaction state 'SENDING'
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: SEND: 0x0 0x1 0x0 0x0 0x0 0x6 0x3 0x3 0x78 0x37 0x0 0x2
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Running transaction 1
2022-03-24 22:23:53: PID: 16819: pymodbus.transaction: Current transaction state - IDLE
2022-03-24 22:23:53: PID: 16819: SMA ModbusTCP: Komponente SMA ModbusTCP Wechselrichter auslesen.
2022-03-24 22:23:53: PID: 16819: legacy run server: Received command ["modules.sma_modbus_tcp.device","192.168.0.211","0","none","none","none","1"]
  RequestsDependencyWarning)

LutzB · Beitrag von **LutzB** » Fr Mär 25, 2022 8:23 am

Der MPM3PM sollte jetzt in der Nightly wieder Werte liefern. Bitte testen.

Frizzel · Beitrag von **Frizzel** » Fr Mär 25, 2022 9:24 am

Die Funktion Erlaubte Speicherentladung im PV Modus ist komplett ohne Funktion. Der Speicher ist voll, erlaubter Wert 70%/500W aber es tut sich nix. Sowohl bei Speicher Vorrang als auch bei EV Vorrang. Meiner Meinung nach sollte das doch bei EV Vorrang den Speicher im erlaubten Beteich entladen können.

LutzB · Beitrag von **LutzB** » Fr Mär 25, 2022 9:27 am

Frizzel hat geschrieben: ↑Fr Mär 25, 2022 9:24 am Die Funktion Erlaubte Speicherentladung im PV Modus ist komplett ohne Funktion. Der Speicher ist voll, erlaubter Wert 70%/500W aber es tut sich nix. Sowohl bei Speicher Vorrang als auch bei EV Vorrang. Meiner Meinung nach sollte das doch bei EV Vorrang den Speicher im erlaubten Beteich entladen können.

In dem Bereich wurden seit gefühlten Ewigkeiten keine Anpassungen durchgeführt (abgesehen vom Einblenden der Felder).

Frizzel · Beitrag von **Frizzel** » Fr Mär 25, 2022 9:29 am

Du warst zu schnell

ich wollte den Post eben löschen. Geht nach reboot. Er hatte die erlaubte Prozentzahl wohl nach Update irgendwie nicht gesehen.

SIDE22 · Beitrag von **SIDE22** » Fr Mär 25, 2022 5:05 pm

LutzB hat geschrieben: ↑Fr Mär 25, 2022 8:23 am Der MPM3PM sollte jetzt in der Nightly wieder Werte liefern. Bitte testen.

supi scheint zu funktionieren

LutzB · Beitrag von **LutzB** » Di Mär 29, 2022 9:48 am

Dort geht es mit RC3 weiter: https://www.openwb.de/forum/viewtopic.php?f=9&t=5095

openWB Forum

Rückmeldungen Beta 1.9.259 (RC2)

Rückmeldungen Beta 1.9.259 (RC2)

Re: Rückmeldungen Beta 1.9.259 (RC2)

Re: Rückmeldungen Beta 1.9.259 (RC2)

Re: Rückmeldungen Beta 1.9.259 (RC2)

Re: Rückmeldungen Beta 1.9.259 (RC2)

Re: Rückmeldungen Beta 1.9.259 (RC2)

Re: Rückmeldungen Beta 1.9.259 (RC2)

Re: Rückmeldungen Beta 1.9.259 (RC2)